American Pride Sliding Door Medicine Cabinet - Step by step directions for measuring your face frame cabinets for cabinet doors that are new. Most cabinet organizations want you to give them the actual door dimensions as opposed to the rough openings. Rough openings would be the actual measurements of the rectangular holes in your cabinets that you want to cover with cabinet doors. You may need to take these measurements before you order and convert them to do or sizes.
Check your cabinet openings when they're square to find out. This really is easily accomplished by measuring diagonally from corner to corner both techniques. In that case your opening is square, when the measurements would be the same. Same thing goes for the peak, measure peak on the left and right sides and take the greater of the two. You have the rough opening measurements.
Now that you have the rough opening measurements, what do you really do with them? You must produce a determination. Just how many overlays do you want to have in your face frame cabinets? Keep in mind how extensive are the types between openings? Stiles are the vertical strips since the the edges of the cabinet box. They will both need clearance to swing-open without hitting the do-or, even if that door is open too if two-doors are alongside and hinge to hinge. The a mount of clearance is mainly a function of which hinge you might be using.
Check along with your hinge manufacturer to locate out how much you really need. Most hinges will need anywhere from zero clearance up to a quarter of an inch. Check the bottom for absolutely any decorative moldings that might hit the bottom of your doorways and alter appropriately.