Kitchen Cabinet Silent Door Closers - Step by step directions for measuring your face frame cabinets for new cabinet doors. Most cabinet companies want you to give the actual door dimensions rather than the tough openings to them. Rough openings would be the actual measurements of the holes that are rectangular in your cabinets which you want to cover with cabinet doors. You may need to take these measurements before you purchase, and change them to do or dimensions.
Check your cabinet openings whether they are square to see. This can be easily accomplished by measuring diagonally from corner to corner both techniques. If the measurements would be the same, then your opening is square. Same thing goes for the height, measure height on the right and left sides and take the larger of both. You have the tough opening measurements.
Now that you have the tough opening measurements, what can you do together? You must make a decision. How many overlays do you want to have on your own face frame cabinets? Keep in mind how wide are the types between openings? They will both need clearance to swing-open without hitting the other door, even if this door is open as well, if two doors are side by side and hinge to hinge. The amount of clearance is mostly a function which hinge you're using.
Check along with your manufacturer to locate out just how much you really need. Most hinges will need anyplace from zero clearance around a quarter of an inch. You'll also need to see just how much clearance there is between the most effective of the opening as well as your countertop or drawer fronts. Check the bottom for absolutely any decorative moldings that might hit the bottom of your doors and change accordingly.