Raised Panel Cabinet Door Construction - For measuring your face frame cabinets for new cabinet doors, step by step instructions. Most cabinet businesses want you to give the real door measurements as opposed to the rough openings to them. Rough openings are the real measurements of the rectangular holes in your cupboards which you want to protect with cabinet doors. Convert them to door dimensions before you purchase and you'll need to consider these measurements.
Check your cabinet openings whether they're square to determine. In the event the measurements are the same, then your opening is square. Then consider the greater of the two and you you should calculate the width at the top and bottom, when they're not. Same thing goes for the height, measure height on the right and left sides and consider the greater of both. You have the rough opening measurements.
Now that you have the rough opening measurements, what can you do together? You have to produce a decision. Keep in mind how wide are the styles between openings? Stiles are the vertical strips since the the edges of the cabinet box. If two-doors are alongside and hinge to hinge, they'll both require clearance to swing-open without hitting the do-or, even if that door is open at the same time. The amount of clearance is primarily a function of which hinge you might be using.
Check along with your manufacturer to locate out just how much you need. Most hinges will need anyplace from zero clearance as much as a quarter of an inch. Check the bottom for any decorative moldings that might hit the bottom of your doors and adjust appropriately.