Sliding Wood Cabinet Door Lock - For measuring your face frame cabinets for new cupboard doors, step by step directions. Most cupboard businesses want you to give the real door measurements rather than the tough openings to them. Rough openings will be the real measurements of the holes that are rectangular in your cupboards that you want to cover with cupboard doors. You will need to take these measurements and change them to do or dimensions before you buy.
Check your cupboard openings to determine whether they are square. If the measurements will be the same, your opening is square. Same thing goes for the height, measure height on the right and left sides and take the greater of both. You have the tough opening measurements.
Given that you've the tough opening measurements, what would you do with them? You have to produce a decision. Exactly how many overlays would you want to have on your face frame cabinets? Keep in mind how wide are the styles between openings? Stiles are the vertical strips covering the edges of the cabinet box. If two-doors are alongside and hinge to hinge, they will both need clearance to swing-open without hitting the door, even if that door is open at the same time. The sum of clearance is primarily a function which hinge you are using.
Check along with your hinge manufacturer to find out just how much you really need. Hinges will need anyplace from zero clearance as much as a quarter of an inch. Check the bottom for absolutely any decorative moldings that may hit the bottom of your doorways and alter accordingly.