Double Cathedral Raised Panel Cabinet Doors - Step by step instructions for measuring your-face frame cabinets for new cabinet doors. Most cabinet companies want one to give the actual door dimensions rather than the rough openings to them. Openings are the actual measurements of the holes in your cabinets that you just want to protect with cabinet doors. You may need to consider these measurements and change them to do or sizes before you order.
Check your cabinet openings whether they're square to determine. When the measurements are the same, your opening is square. When they're not, then you will want to calculate the width at the top and bottom and consider the greater of the two. Same thing goes for the height, measure height on the right and left sides and consider the greater of both. You have the rough opening measurements.
Since you have the rough opening measurements, what does one do together? You must produce a choice. Keep in mind how broad are the designs between openings? If two-doors are side by side and hinge to hinge, they will both require clearance to swing-open without hitting the other door, even if that door is open as well. The a mount of clearance is primarily a function that hinge you're using.
Check with your manufacturer to locate out just how much you really need. Most hinges will need anyplace from zero clearance up to a quarter of an inch. You will need to observe just how much clearance there is between the top of your countertop or drawer fronts and the opening. Check the bottom for absolutely any decorative moldings that may hit the bottom of your doors and change accordingly.