Refacing Cabinet Doors With Molding


Refacing Cabinet Doors With Molding

Refacing Cabinet Doors With Molding - Step by step directions for measuring your face frame cabinets for cupboard doors that are new. Most cupboard companies want one to give them the real door measurements rather than the tough openings. Openings would be the real measurements of the holes in your cupboards that you just want to protect with cupboard doors. Transform them to door sizes before you purchase and you may need to consider these measurements.

Check your cupboard openings if they're square to determine. This is easily achieved by measuring diagonally from corner to corner both ways. When the measurements would be the same, your opening is square. Then consider the greater of the two and you you will need to calculate the width at the top and bottom, if they're not. Same thing goes for the peak, measure peak on the right and left sides and consider the greater of the two. You now have the tough opening measurements.

Now that you've the tough opening measurements, what do you do with them? You now need to make a decision. Exactly how many overlays would you want to have in your face frame cabinets? Keep in mind how extensive are the designs between openings? They'll both require clearance to swing open without hitting the door, even if this door is open as well if two-doors are side by side and hinge to hinge. The amount of clearance is mostly a function of which hinge you are using.

Check together with your hinge manufacturer to find out just how much you need. Most hinges will need anyplace from zero clearance up to a quarter of an inch. You will need to observe just how much clearance there is between the very top of the opening and your counter-top or drawer fronts. Check the bottom for any decorative moldings that may hit the bottom of your doors and adjust accordingly.